Cisco Cisco Packet Data Interworking Function (PDIF)
Peer Profile Configuration Mode Commands
description ▀
Command Line Interface Reference, StarOS Release 18 ▄
8037
description
Sets a relevant descriptive string for the specific peer profile. By default it is blank.
Product
GGSN
P-GW
SAEGW
S-GW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Peer Profile Configuration
configure > peer-profile service-type <service-type> {default | name peer_profile_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-peer-profile-ggsn/pgw/sgw-access/nw)#
Syntax
description desc_string
no description
no
Removes the set description for GGSN, P-GW, or S-GW service peer profile configured through this mode.
desc_string
Indicates the description for GGSN, P-GW, or S-GW service peer profile configured through this mode; must
be an alphanumeric string from 1 through 64 characters.
be an alphanumeric string from 1 through 64 characters.
Usage
Use this command to set a relevant description for GGSN, P-GW, or S-GW peer profile configured through
this mode.
this mode.
Example
The following command sets the description
ggsn_gtpc_SGSN_profile1
for a GGSN peer profile:
description ggsn_gtpc_SGSN_profile1