Cisco Cisco Packet Data Interworking Function (PDIF)
PVC Configuration Mode Commands
shutdown ▀
Command Line Interface Reference, StarOS Release 18 ▄
8143
shutdown
Disables/enables traffic over the current VLAN.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > ATM Port Configuration > PVC Configuration
configure > port atm slot_number/port_number > pvc vpi vpi_number vci vci_number
Entering the above command sequence results in the following prompt:
[local]host_name(config-port-slot_number/port_number-pvc-pvc_number/vci_number)#
Syntax
shutdown
no shutdown
no
Enables the VLAN. When omitted the VLAN is non-functional.
Usage
Enables/ Disables specified VLAN.
This command is necessary to bring a VLAN into service by enabling it via the
This command is necessary to bring a VLAN into service by enabling it via the
no
keyword.
Example
To disable a VLAN from sending or receiving network traffic use the following command:
shutdown
To enable a VLAN use the following command:
no shutdown