Cisco Cisco Packet Data Interworking Function (PDIF)
Route-map Configuration Mode Commands
▀ set metric-type
▄ Command Line Interface Reference, StarOS Release 18
8378
set metric-type
This command sets the route metric type to either Type-1 or Type-2 in the AS-external-LSA.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > Route-map Configuration
configure > context context_name > route-map map_name { deny | permit }
seq_number
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-route-map)#
Syntax
[ no ] set metric-type { type-1 | type-2 }
type-1
Sets the route metric to external type-1.
type-2
Sets the route metric to external type-2
Usage
Use this command to set the route metric to either external type-1 or external type-2.
Example
To set the route metric to type-1, enter the following command:
set metric-type type-1