Cisco Cisco Packet Data Interworking Function (PDIF)
RS-232 Port Configuration Mode Commands
▀ snmp trap link-status
▄ Command Line Interface Reference, StarOS Release 18
8388
snmp trap link-status
Enables or disables the generation of an SNMP trap for link status changes.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > RS-232 Port Configuration
configure > port rs232 slot_number/port_number
Entering the above command sequence results in the following prompt:
[local]host_name(config-port-slot_number/port_number)#
Syntax
[ no ] snmp trap link-status
no
Disables the sending of traps for link status changes.
Usage
Enable link status change traps when a monitoring facility can use the information or if there are trouble
shooting activities are in progress.
shooting activities are in progress.
Example
The following command enables link status change traps:
snmp trap link-status