Cisco Cisco Packet Data Interworking Function (PDIF)
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
SCTP Parameter Template Configuration Mode Commands
▀ sctp-rto-min
▄ Command Line Interface Reference, StarOS Release 18
8456
sctp-rto-min
Configures the minimum SCTP retransmission timeout (RTO).
Product
MME
Privilege
Administrator
Mode
Exec > Global Configuration > SCTP Parameter Template Configuration
configure > sctp-param-template template_name
Entering the above command sequence results in the following prompt:
[local]host_name(sctp-param-template)#
Syntax
sctp-rto-min [ units-10ms ] value
default sctp-rto-min
default
Returns the command to its default setting of 10 (1000 milliseconds).
units-10ms
Including this keyword specifies that the integer
value
is to be calculated using 10ms increments (instead of
100ms increments) to allow for finer granularity.
value
is an integer from 0 through 500.
value
Specifies the minimum time for SCTP RTOs as an integer from 1 through 50. The granularity is in 100ms
increments (20 = 2000ms). Default: 10 (1000 milliseconds)
increments (20 = 2000ms). Default: 10 (1000 milliseconds)
Usage
Use this command to configure the minimum time for SCTP RTOs.
Example
The following command configures the minimum time for SCTP RTOs to 2000ms:
sctp-rto-min 20