Cisco Cisco Packet Data Interworking Function (PDIF)
SCTP Parameter Template Configuration Mode Commands
▀ timeout
▄ Command Line Interface Reference, StarOS Release 18
8460
timeout
Configures timeouts for SCTP data chunk bundle transmissions and/or SCTP heartbeat request responses.
Product
MME
Privilege
Administrator
Mode
Exec > Global Configuration > SCTP Parameter Template Configuration
configure > sctp-param-template template_name
Entering the above command sequence results in the following prompt:
[local]host_name(sctp-param-template)#
Syntax
timeout { sctp-bundle [ units-10ms ] timer | sctp-heart-beat value }
[ default | no ] timeout { sctp-bundle | sctp-heart-beat }
default
Returns the command to its default setting of disabled for
sctp-bundle
and 30 seconds for
sctp-heart-
beat
.
no
Removes the selected configuration.
sctp-bundle [ units-10ms ] timer
Specifies that SCTP data chunks are to be queued until this timer expires at which time the data chunks are
bundled and committed for transmission.
bundled and committed for transmission.
timer
is an integer from 1 through 65535, in 100ms increments (10 = 1000ms or 1 second).
[ units-10ms ]
: Including this optional keyword specifies that the integer
timer
is to be calculated using
10ms increments (instead of 100ms increments) to allow for finer granularity.
Default: Disabled.
Default: Disabled.
sctp-heart-beat value
Default: 30 seconds
Specifies the SCTP heartbeat timeout (in seconds) as an integer from 1 through 300. An SCTP heartbeat is
sent to a peer to determine reachability. If an acknowledgement is not received before this timer runs out,
heartbeat requests are no longer sent and the peer is considered unreachable.
Specifies the SCTP heartbeat timeout (in seconds) as an integer from 1 through 300. An SCTP heartbeat is
sent to a peer to determine reachability. If an acknowledgement is not received before this timer runs out,
heartbeat requests are no longer sent and the peer is considered unreachable.
Usage
Use this command to configure timeouts for SCTP data chunk bundle transmissions and/or SCTP heartbeat
request responses.
request responses.
Example
The following command enables the SCTP data chunk bundle timeout value and configures it to 2 seconds: