Cisco Cisco Packet Data Interworking Function (PDIF)
SGTP Service Configuration Mode Commands
gtpc ▀
Command Line Interface Reference, StarOS Release 18 ▄
8685
gtpc
Configure the GPRS Tunneling Protocol Control (GTP-C) settings for the SGTP service.
Product
eWAG
MME
PDG/TTG
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > SGTP Service Configuration
configure > context context_name > sgtp-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-sgtp-service)#
Syntax
gtpc { bind address ipv4_address | dns-sgsn context context_name | echo-interval
interval_seconds | echo-retransmission { exponential-backoff [ [ min-timeout
timeout_seconds ] [ smooth-factor smooth_factor ] + ] | timeout timeout_seconds } |
guard-interval interval_seconds | ignore response-port-validation | ip qos-dscp
dscp_marking | max-retransmissions max_retransmissions | retransmission-timeout
timeout_seconds | send { common flags | rab-context | target-identification-preamble } |
sync-echo-with-peer }
interval_seconds | echo-retransmission { exponential-backoff [ [ min-timeout
timeout_seconds ] [ smooth-factor smooth_factor ] + ] | timeout timeout_seconds } |
guard-interval interval_seconds | ignore response-port-validation | ip qos-dscp
dscp_marking | max-retransmissions max_retransmissions | retransmission-timeout
timeout_seconds | send { common flags | rab-context | target-identification-preamble } |
sync-echo-with-peer }
no gtpc { bind address | dns-sgsn context | echo-interval | send { common-flags | rab-
context | target-identification-preamble } | sync-echo-with-peer }
context | target-identification-preamble } | sync-echo-with-peer }
default gtpc { echo-interval | echo-retransmission | guard-interval | ignore response-
port-validation | ip qos-dscp | max-retransmissions | retransmission-timeout | send {
common-flags | rab-context | target-identification-preamble } | sync-echo-with-peer }
port-validation | ip qos-dscp | max-retransmissions | retransmission-timeout | send {
common-flags | rab-context | target-identification-preamble } | sync-echo-with-peer }
no
Disables the configured GTP-C setting.
default
Resets the specified parameter to its default value.
bind address ipv4_address
Binds SGTP service to the IP address of the interface.
The bind address for the
The bind address for the
gtpc
and
gtpu
commands should be the same.
ipv4_address
must be a standard IPv4 address.