Cisco Cisco Packet Data Interworking Function (PDIF)
S-GW Service Configuration Mode Commands
ddn isr-sequential-paging ▀
Command Line Interface Reference, StarOS Release 18 ▄
8721
ddn isr-sequential-paging
Configures the delay time in 100 millisecond increments between paging of different RAT types in support of the
Intelligent Paging for ISR feature.
Intelligent Paging for ISR feature.
Product
S-GW
SAEGW
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > S-GW Service Configuration
configure > context context_name > sgw-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-sgw-service)#
Syntax
ddn isr-sequential-paging delay-time delay
default ddn isr-sequential-paging
default
Returns the delay time to its default value of 10 ( 10 * 100 ms = 1 second).
delay-time
delay
Configures delay between paging of different RAT types.
delay
must be an integer from 1 to 255, representing increments of 100 milliseconds (delay = 1-255 * 100
ms).
Default: 10 (10 * 100 ms = 1 second)
Default: 10 (10 * 100 ms = 1 second)
Usage
Use this command to configure the delay time in (100 millisecond increments) between paging of different
RAT types in support of the Intelligent Paging for ISR feature.
RAT types in support of the Intelligent Paging for ISR feature.
Example
The following command configures the delay timer to 5 seconds.
ddn isr-sequential-paging delay-timer 50