Cisco Cisco Packet Data Interworking Function (PDIF)
S-GW Service Configuration Mode Commands
▀ plmn
▄ Command Line Interface Reference, StarOS Release 18
8736
plmn
Configures the public land mobile network (PLMN) identifiers for this S-GW. service
Product
S-GW
SAEGW
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > S-GW Service Configuration
configure > context context_name > sgw-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-sgw-service)#
Syntax
plmn id mcc number mnc number [ primary ]
no plmn id mcc number mnc number
no
Removes the configured PLMN ID for this S-GW service.
mcc number
Configures the Mobile Country Code for this PLMN ID.
number
must be an integer from 100 through 999.
mnc number
Configures the Mobile Network Code for this PLMN ID.
number
must be a 2- or 3-digit integer from 00 through 999,
primary
Specifies that this is the primary PLMN ID for this S-GW service.
Usage
The PLMN identifier is used by the S-GW service to determine whether or not a mobile station is visiting,
roaming, or home. Multiple S-GW services can be configured with the same PLMN identifier. Up to five
PLMN IDs can be configured for each S-GW Service. In Release 15.0 and later, up to 15 PLMN IDs can be
configured.
roaming, or home. Multiple S-GW services can be configured with the same PLMN identifier. Up to five
PLMN IDs can be configured for each S-GW Service. In Release 15.0 and later, up to 15 PLMN IDs can be
configured.
Example
The following command configures a “primary” PLMN ID for this S-GW service with an MCC of
123
and
an MNC of
12
:
plmn id mcc 123 mnc 12 primary