Cisco Cisco Packet Data Interworking Function (PDIF)
SLs Service Configuration Mode Commands
t-3x02 ▀
Command Line Interface Reference, StarOS Release 18 ▄
8751
t-3x02
Configures timer settings for resending the Reset Request message to the E-SMLC.
Product
MME
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > SLs Service Configuration
configure > context context_name > sls-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-sls-service)#
Syntax
t-3x02 seconds
default t-3x02
default
Resets the timer to the default setting of 3 seconds.
seconds
seconds
must be an integer from 1 to 5. The default setting is 3 seconds.
Usage
The T-3x02 timer is started on the MME when the MME sends a RESET REQUEST to the E-SMLC. Once
the T3x02 timer expires, the MME can resend the RESET REQUEST to the E-SMLC.
Refer to the
the T3x02 timer expires, the MME can resend the RESET REQUEST to the E-SMLC.
Refer to the
max-retransmissions
command to configure the maximum number of times the MME will
resend a RESET REQUEST to the E-SMLC.