Cisco Cisco Packet Data Interworking Function (PDIF)
Subscriber Configuration Mode Commands
npu qos ▀
Command Line Interface Reference, StarOS Release 18 ▄
8907
npu qos
Configures an Network Processing Unit (NPU) QoS priority queue for packets from the subscriber.
Product
PDSN
GGSN
ASN-GW
P-GW
SAEGW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > Subscriber Configuration
configure > context context_name > subscriber { default | name subscriber_name }
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-subscriber)#
Syntax
npu qos traffic priority { best-effort | bronze | derive-from-packet-dscp | gold | silver
}
}
best-effort
Assigns the best-effort queue priority. This is the lowest priority.
bronze
Assigns the bronze queue priority. This is the third-highest priority.
derive-from-packet-dscp
Default: Enabled
Specifies that the priority is to be determined from the DS field in the packet's TOS octet.
Specifies that the priority is to be determined from the DS field in the packet's TOS octet.
gold
Assigns the gold queue priority. This is the highest priority.
silver
Assigns the silver queue priority. This is the second-highest priority.
Usage
This command is used in conjunction with the Network Processing Unit (NPU) Quality of Service (QoS)
functionality.
functionality.