Cisco Cisco ASR 5700
AAA Server Group Configuration Mode Commands
radius accounting server ▀
Command Line Interface Reference, StarOS Release 17 ▄
187
priority priority
Specifies the relative priority of this accounting server. The priority is used in server selection for
determining which server to send accounting data to.
determining which server to send accounting data to.
priority
must be an integer from 1 through 1000, where 1 is the highest priority. When configuring two or
more servers with the same priority you will be asked to confirm that you want to do this. If you use the
-
noconfirm
option, you are not asked for confirmation and multiple servers could be assigned the same
priority.
Default: 1000
Default: 1000
type { mediation-device | standard }
mediation-device
: Obsolete keyword.
Specifies the type of AAA transactions to use to communicate with this RADIUS server.
standard
: Use standard AAA transactions.
Default:
standard
admin-status { disable | enable }
Configures the admin-status for the RADIUS accounting server.
enable
: Enables the RADIUS accounting server.
disable
: Disables the RADIUS accounting server.
-noconfirm
Specifies that the command must execute without any prompts and confirmation from the user.
Usage
Use this command to configure the RADIUS accounting servers with which the system must communicate
for accounting.
You can configure up to 1600 RADIUS servers per context/system and 128 servers per server group. The
servers can be configured as Accounting, Authentication, Charging servers, or any combination thereof.
for accounting.
You can configure up to 1600 RADIUS servers per context/system and 128 servers per server group. The
servers can be configured as Accounting, Authentication, Charging servers, or any combination thereof.
Example
The following command sets the accounting server with mediation device transaction for AAA server
10.2.3.4
:
radius mediation-device accounting server 10.2.3.4 key sharedKey port
1024 max 127
1024 max 127