Cisco Cisco ASR 5700
Context Configuration Mode Commands I-M
▀ multicast-proxy
▄ Command Line Interface Reference, StarOS Release 17
2622
multicast-proxy
Creates, configures or deletes a multicast proxy host configuration.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration
configure > context context_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ctx)#
Syntax
[no] multicast-proxy { igmp interface ip_address range-start start_ip_address range-end
end_ip_address | listen address listen_ip_address port port_number protocol
protocol_number sessmgr instance }
end_ip_address | listen address listen_ip_address port port_number protocol
protocol_number sessmgr instance }
no
If previously configured, deletes the specified multicast proxy parameter from the current context.
igmp interface
ip_address
range-start
start_ip_address
range-end
end_ip_address
Specifies the IP address and range of associated addresses for this Internet Group Management Protocol
(IGMP) interface.
(IGMP) interface.
ip_address
is the IP address of this interface expressed in IPv4 dotted-decimal or IPv6 colon-separated-
hexadecimal notation.
range-start
start_ip_address
is the start point for the multicast address range expressed in
IPv4dotted-decimal or IPv6 colon-separated-hexadecimal notation.
range-end
end_ip_address
is the end point for the multicast address range expressed in IPv4 dotted-
decimal or IPv6 colon-separated-hexadecimal notation.
end_ip_address
listen address
listen_ip_address
port
port_number
protocol
protocol_number
sessmgr
instance
Configures this context as a multicast proxy listener.
listen_ip_address
is the IP address that will be listened to, expressed in IPv4 dotted-decimal or IPv6
colon-separated-hexadecimal notation.
port
port_number
is the port number which will be listened to. If this is not provided, the listener will
receive all packets from the
listen_ip_address
.
port_number
is an integer from 1 through 65535.
protocol
protocol_number
is the IANA protocol number associated with the port number. If this is not
provided, the listener will receive all packets from the
listen_ip_address
and
port_number
.
protocol_number
is an integer from 1 through 255.
sessmgr
instance
session manager instance that will do the listening.
instance
is an integer from 1
through 270.