Cisco Cisco ASR 5700
Context Configuration Mode Commands N-R
radius keepalive ▀
Command Line Interface Reference, StarOS Release 17 ▄
2715
password
Configures the password to be used for the authentication as an alphanumeric string of 1 through 63
characters. Default: Test-Password
characters. Default: Test-Password
retries retries_no_of
Configures the number of times the keepalive access request are sent before marking the server as
unreachable.
unreachable.
retries_no_of
must be an integer from 3 through 10. Default: 3
timeout timeout_duration
Configures the time interval (in seconds) between keepalive access request retries.
timeout_duration
must
be an integer from 1 through 30. Default: 3
username user_name
Configures the username to be used for authentication as an alphanumeric string of 1 through 127 characters.
Default: Test-Username
Default: Test-Username
valid-response access-accept [ access-reject ]
Configures the valid response for the authentication request.
If
If
access-reject
is configured, then both access-accept and access-reject are considered as success for the
keepalive authentication request.
If
If
access-reject
is not configured, then only access-accept is considered as success for the keepalive
access request.
Default:
Default:
keepalive valid-response access-accept
Usage
Use this command to configure the Keepalive Authentication parameters for the RADIUS server.
Example
The following command sets the user name for the RADIUS keepalive access requests to
Test-Username2
:
radius keepalive username Test-Username2
The following command sets the number of retries to
4
:
radius keepalive retries 4