Cisco Cisco ASR 5700
Exec Mode Commands (D-S)
mme relocate-ue imsi ▀
Command Line Interface Reference, StarOS Release 17 ▄
4107
mme relocate-ue imsi
This command enables the operator to detach a UE from the current MME and cause it to reattach to another MME in
the pool.
the pool.
Product
MME
Privilege
Security Administrator, Administrator
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
mme relocate-ue imsi imsi new-guti mme-group-id grp_id mme-code mme_code m-tmsi mtmsi
imsi imsi
Specifies the Mobile Station Identifier of the UE to be relocated. This UE must be registered or connected to
this MME.
this MME.
new-guti mme-group-id group_id
The group to which the target MME belongs.
grp_id
:
Beginning with Releases 16.5, 17.4, and 18.2 and forward, the valid range for mme group id value is
from 0 through 65536.
Previous releases, the valid range for mme group id value is from 32768 through 65536.
mme-code mme_code
The target MME to which this UE should be attached.
mme_code
: The unique identifier for the target MME; must be value from 0 through 255.
m-tmsi mtmsi
The new GUTI MME-TMSI for this UE.
mtmsi
: A value from 0 through 4294967295.
Usage
MME uses this configuration to relocate UEs to a different MME using IMSI, mme-group-id, mme-code and
m-tmsi.
m-tmsi.