Cisco Cisco ASR 5700
Firewall-and-NAT Policy Configuration Mode Commands
▀ firewall policy
▄ Command Line Interface Reference, StarOS Release 17
5074
ipv4-only
Enables IPv4 Stateful Firewall and disables IPv6 Stateful Firewall in the Firewall-and-NAT policy.
ipv6-only
Enables IPv6 Stateful Firewall and disables IPv4 Stateful Firewall support in the Firewall-and-NAT policy.
Usage
Use this command to enable/disable IPv4 and/or IPv6 Stateful Firewall support for all subscribers using a
Firewall-and-NAT policy.
Firewall-and-NAT policy.
Example
The following command enables IPv4 and IPv6 Stateful Firewall support in a Firewall-and-NAT policy:
firewall policy ipv4-and-ipv6
The following command disables Stateful Firewall support in a Firewall-and-NAT policy:
no firewall policy