Cisco Cisco ASR 5700
IuPS Service Configuration Mode Commands
▀ security-mode-complete-timeout
▄ Command Line Interface Reference, StarOS Release 17
6776
security-mode-complete-timeout
This command configures the security mode timer.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > IuPS Service Configuration
configure > context context_name > iups-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ctx-iups-service)#
Syntax
security-mode-complete-timeout time
default security-mode-complete-timeout
default
Resets the timer configuration to the default settings.
time
Configures the interval (in seconds) the SGSN waits for the security mode from the MS to complete.
time
must be an integer from 1 to 60.
Default is 5
Usage
Use this command to configure the timer that determines how long the SGSN waits for a Security Mode
Complete message from the MS (mobile station).
Complete message from the MS (mobile station).
Example
Instruct the SGSN to wait
7
seconds:
security-mode-complete-timeout 7