Cisco Cisco ASR 5700
OSPF Configuration Mode Commands
area virtual-link authentication-key ▀
Command Line Interface Reference, StarOS Release 17 ▄
7449
Usage
Use this command to specify the authentication password for a virtual link between an area that is connected
to the network backbone and an area that cannot be connected to the network backbone.
to the network backbone and an area that cannot be connected to the network backbone.
Example
The following command creates an authentication password of
123456
for a virtual link between the OSPF
areas defined by the IP address
192.168.100.10
and the IP address
192.168.200.20
:
area 192.168.100.10 virtual-link 192.168.200.20 authentication-key
password 123456
password 123456