Cisco Cisco Packet Data Gateway (PDG)
Call Control Profile Configuration Mode
regional-subscription-restriction ▀
Command Line Interface Reference, StarOS Release 17 ▄
2061
regional-subscription-restriction
Allows the operator to define the cause code for subscriber rejection when it is due to regional subscription information
failure.
failure.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Call Control Profile Configuration
configure > call-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-call-control-profile-profile_name)#
Syntax
[ remove ] regional-subscription-restriction [ failure-code code | user-device-release {
before-r99 failure-code code | r99-or-later failure-code code } ]
before-r99 failure-code code | r99-or-later failure-code code } ]
remove
This keyword causes the configuration to be deleted from the call control profile configuration.
failure-code cause_code
cause_code:
Enter an integer from 2 to 111; default code is 13 (roaming not allowed in this location area
[LA]).
Refer to the GMM failure cause codes listed below (from section 10.5.5.14 of the 3GPP TS 124.008 v7.2.0
R7):
Refer to the GMM failure cause codes listed below (from section 10.5.5.14 of the 3GPP TS 124.008 v7.2.0
R7):
2 - IMSI unknown in HLR
3 - Illegal MS
6 - Illegal ME
7 - GPRS services not allowed
8 - GPRS services and non-GPRS services not allowed
9 - MSID cannot be derived by the network
10 - Implicitly detached
11 - PLMN not allowed
12 - Location Area not allowed
13 - Roaming not allowed in this location area
14 - GPRS services not allowed in this PLMN
15 - No Suitable Cells In Location Area
16 - MSC temporarily not reachable
17 - Network failure