Cisco Cisco Packet Data Gateway (PDG)
CGW Service Configuration Mode Commands
▀ revocation
▄ Command Line Interface Reference, StarOS Release 17
2228
revocation
Configures Binding Revocation support for specific CGW service.
Product
SaMOG
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > CGW Configuration
configure > context context_name > cgw-service cgw_service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-cgw-service)#
Syntax
revocation { enable | max-retransmission max_retransmission | retransmission-timeout
msecs }
msecs }
default revocation { enable | max-retransmission | retransmission-timeout }
no revocation enable
default
Resets the revocation to its default value.
no
Disables revocation.
enable
Enables the Binding Revocation Support. Default is disabled.
max-retransmission
max_retransmission
Configures the maximum number of retransmissions.
max_retransmission
must be an integer between
0
and
10
.
retransmission-timeout
msecs
Configures the retransmission timeout in milli seconds.
msecs
must be an integer between
500
and
10000
.
Usage
Use this command to configure Binding Revocation support for specific CGW service.
Example
The following command configures the retransmission timeout to 1000 milli seconds.