Cisco Cisco Packet Data Gateway (PDG)
Connected Apps Configuration Mode Commands
▀ rri-mode
▄ Command Line Interface Reference, StarOS Release 17
2254
rri-mode
Configures Reverse Route Injection (RRI) mode. (VPC-VSM only)
Product
SecGW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Connected Apps Configuration
configure > connectedapps
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-connectedapps)#
Syntax
rri-mode { both | none | ras | s2s }
no rri-mode
no
Disables the current RRI mode setting.
both
Support RAS and S2S modes.
none
Support neither RAS nor S2S mode.
ras
Support Remote Access Service mode only.
s2s
Support Site-to-Site mode only.
Usage
Use this command to set the RRI mode.
Example
The following command sets the RRI mode to RAS.
rri-mode ras