Cisco Cisco Packet Data Gateway (PDG)
Exec Mode show Commands (M-P)
▀ show mme-service session
▄ Command Line Interface Reference, StarOS Release 17
4736
show mme-service session
Displays session information for Mobile Management Entity (MME) service(s) running on a peer or local system.
Product
MME
Privilege
Inspector
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
show mme-service session [ summary | full | counters ] [ all | callid call_identifier |
imei imei_id | imsi imsi_id | ipsec | mme-service service_name | msisdn number | pdn-
address pdn_ip_address | s1-peer s1_peer_ip_address | s11-peer s11_peer_ip_address | vlr-
name vlr_name | ue-ecm-state { connected | idle } ] [ | { grep grep_options | more } ]
imei imei_id | imsi imsi_id | ipsec | mme-service service_name | msisdn number | pdn-
address pdn_ip_address | s1-peer s1_peer_ip_address | s11-peer s11_peer_ip_address | vlr-
name vlr_name | ue-ecm-state { connected | idle } ] [ | { grep grep_options | more } ]
summary
Displays summarized output for this command.
full
Displays detailed output for this command.
counters
Displays all counters for related events and messages for an MME session running on a system.
all
Displays information for all MME sessions running on this system.
callid call_identifier
Displays summarized or detailed configuration information for an MME session filtered by a call identifier
within an MME service configured on this system.
within an MME service configured on this system.
call_identifier
must be an existing call identity in 8-digit hexadecimal format running in an MME
service on this system.
imei imei_id
Displays summarized or detailed configuration information about MME sessions running and filtered by an
International Mobile Equipment Identification (IMEI) number within an MME service configured on this
system.
International Mobile Equipment Identification (IMEI) number within an MME service configured on this
system.
imei_id
must be an existing IMEI in an existing MME service on the system.
imei_id
must contain an 8-
digit TAC (Type Allocation Code) and a 6-digit SNR (Serial Number).