Cisco Cisco Packet Data Gateway (PDG)
Global Configuration Mode Commands (L-S)
snmp discard-snmpv3-pdu ▀
Command Line Interface Reference, StarOS Release 17 ▄
5481
snmp discard-snmpv3-pdu
Configures the system to discard all SNMPv3 protocol data units (PDUs) received.
Product
All
Privilege
Administrator
Mode
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]host_name(config)#
Syntax
[ no ] snmp discard-snmpv3-pdu
no
Returns the command to the default setting, where SNMPv3 messages are processed.
discard-snmpv3-pdu
Configures the system to discard all SNMPv3 PDUs received.
Usage
Use this command to configure the system to discard all SNMPv3 messages received. By default, the system
processes SNMPv3 PDUs.
processes SNMPv3 PDUs.
Example
The following command configures the system to discard all SNMPv3 messages received.
snmp discard-snmpv3-pdu