Cisco Cisco Packet Data Gateway (PDG)
Global Configuration Mode Commands (threshold poll commands A - N)
▀ threshold poll edr-file-space interval
▄ Command Line Interface Reference, StarOS Release 17
5768
threshold poll edr-file-space interval
Command configures the polling interval for Event Data Record (EDR) File Space Usage threshold.
Product
ACS
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]host_name(config)#
Syntax
threshold poll edr-file-space interval duration
interval duration
Default: 300 seconds.
Specifies the polling interval (in seconds) for the EDR File Space Usage threshold.
Specifies the polling interval (in seconds) for the EDR File Space Usage threshold.
duration
must be an integer from 60 through 60000.
Usage
This command configures the polling interval for EDR File Space Usage threshold.
Important:
All configured polling intervals are rounded up to the closest multiple of 30. For example, if a
polling interval is configured for 130 seconds, the system uses a polling interval of 150 seconds.
Refer to the
threshold monitoring
and other threshold commands for additional information on the
system’s support for thresholds in this chapter.
Important:
To enable an SNMP trap for monitoring this threshold use the
snmp trap enable
ThreshEDRFileSpace
command in this mode.
Example
The following command configures the polling interval to
600
seconds for the EDR file space usage
threshold:
threshold poll edr-file-space interval 600