Cisco Cisco Packet Data Gateway (PDG)
GTPP Server Group Configuration Mode Commands
▀ gtpp charging-agent
▄ Command Line Interface Reference, StarOS Release 17
6070
Usage
This command can be used to establish a UDP interface to connect to the GSS or this command can establish
a Ga interface to connect to the CFG. These interfaces must exist in the same context in which GTPP
functionality is configured (refer to the gtpp commands in this chapter).
This command instructs the system as to what interface to use. The IP address supplied is also the address by
which the GGSN/SGSN is known to the CGF or the GSS. Therefore, the IP address used for the Ga or UDP
interface could be identical to one bound to a GGSN/SGSN service (a Gn interface).
If no GGSN/SGSN services are configured in the same context as the Ga/UDP interface, the address
configured by this command is used to receive unsolicited GTPP packets.
a Ga interface to connect to the CFG. These interfaces must exist in the same context in which GTPP
functionality is configured (refer to the gtpp commands in this chapter).
This command instructs the system as to what interface to use. The IP address supplied is also the address by
which the GGSN/SGSN is known to the CGF or the GSS. Therefore, the IP address used for the Ga or UDP
interface could be identical to one bound to a GGSN/SGSN service (a Gn interface).
If no GGSN/SGSN services are configured in the same context as the Ga/UDP interface, the address
configured by this command is used to receive unsolicited GTPP packets.
Example
The following command configures the system to use the interface with an IP address of 192.168.13.10 as the
accounting interface with port
accounting interface with port
20000
to the CGF:
gtpp charging-agent address 192.168.13.10
gtpp charging-agent address 192.168.13.10 port 20000