Cisco Cisco Packet Data Gateway (PDG)
Command Line Interface Reference, StarOS Release 17 ▄
6299
Chapter 166
HLR Configuration Mode Commands
The HLR Configuration Mode provides the commands and parameters to configure the home location register (HLR)
node that is the database containing the subscriber profile and connection information for a specific GPRS/UMTS core
network.
node that is the database containing the subscriber profile and connection information for a specific GPRS/UMTS core
network.
The HLR Configuration Mode is a sub-mode derived from the MAP Configuration Mode which controls the MAP
service configuration. It is the MAP service that provides the application-layer protocol support used to connect the
HLR to other nodes in the network such as the SGSN.
service configuration. It is the MAP service that provides the application-layer protocol support used to connect the
HLR to other nodes in the network such as the SGSN.
Mode
Exec > Global Configuration > Context Configuration > MAP Service Configuration > HLR Configuration
configure > context context_name > map-service service_name > hlr
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-map-service-service_name-hlr)#
Important:
The commands or keywords/variables that are available are dependent on platform type, product
version, and installed license(s).