Cisco Cisco Packet Data Gateway (PDG)
HSS Peer Service Configuration Mode Commands
diameter suppress ▀
Command Line Interface Reference, StarOS Release 17 ▄
6447
diameter suppress
Configures the MME to restrict the sending of the Notify-Request-Message to the HSS. By default, the Notify-Request-
Message is sent to the HSS.
Message is sent to the HSS.
Product
MME
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > HSS Peer Service Configuration
configure > context context_name > hss-peer-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-hss-peer-service)#
Syntax
[ no ] diameter suppress notify-request
no
Sets the command to the default value where the Notify-Request-Message is sent to the HSS.
Usage
Use this command to restrict the MME from sending the Notify-Request-Message to the HSS. This can be
used to control whether handover to non-3GPP access can occur.
used to control whether handover to non-3GPP access can occur.