Cisco Cisco Packet Data Gateway (PDG)
LTE Policy Configuration Mode Commands
▀ congestion-action-profile
▄ Command Line Interface Reference, StarOS Release 17
7052
congestion-action-profile
Creates an action profile for MME or ePDG or HeNBGW critical, major and minor congestion thresholds. The profile
defines the action to be taken when these thresholds are exceeded.
defines the action to be taken when these thresholds are exceeded.
Product
ePDG
HeNBGW
MME
Privilege
Administrator
Mode
Exec > Global Configuration > LTE Policy Configuration
configure > lte-policy
Entering the above command sequence results in the following prompt:
[local]host_name(lte-policy)#
Syntax
[ no ] congestion-action-profile profile_name
no
Removes the specified profile from the system.
profile_name
Specifies the name of the action profile. If the entered name does not refer to an existing profile, a new profile
is created.
is created.
profile_name
is an alphanumeric string of 1 through 64 characters.
-noconfirm
Executes the command without any additional prompt and confirmation from the user.
Usage
Use this command to establish MME or ePDG action profiles to be associated with critical, major and minor
congestion thresholds. This command is also used to remove an existing profile.
For information on setting the action to be taken within this profile, see the Congestion Action Profile
Configuration Mode Commands chapter in this guide, and the Congestion Control chapter in the System
Administration Guide.
congestion thresholds. This command is also used to remove an existing profile.
For information on setting the action to be taken within this profile, see the Congestion Action Profile
Configuration Mode Commands chapter in this guide, and the Congestion Control chapter in the System
Administration Guide.
Example
The following command creates a major congestion action profile named
mme_major_profile
and moves
to the Congestion Action Profile Configuration mode:
congestion-action-profile mme_major_profile