Cisco Cisco Packet Data Gateway (PDG)
MAP Service Configuration Mode Commands
gmlc ▀
Command Line Interface Reference, StarOS Release 17 ▄
7139
gsn-address ipv4 address
Identifies the IP address of the GMLC of the local PLMN. The address will be published to the HLR in the
MAP Update_GPRS_Location Request.
MAP Update_GPRS_Location Request.
ipv4 address
must be a standard dotted-decimal notation.
Important:
Even though
gsn-address
is optional per the CLI grammar, this keyword is a mandatory parameter
when configuring the GMLC for the location service feature in the SGSN.
source-ssn ssn
Identifies the subsystem number (SSN) to be used.
ssn
must be an integer from 1 to 255.
Usage
This command identifies the GMLC associated with the MAP Service configuration in support of the
Location Services functionality enabled on the SGSN.
Only one GMLC can be defined per MAP Service configuration.
Related Commands:
Location Services functionality enabled on the SGSN.
Only one GMLC can be defined per MAP Service configuration.
Related Commands:
associate map-service
in the Location Service configuration mode associates this MAP service
when configuration Location Services functionality.
Example
Use a command similar to the following to define a gateway mobility location center (GMLC) with an ISDN
ID of
ID of
491720499
, a GSN address of
192.168.64.1
, and an SSN of
131
:
gmlc isdn 491720499 gsn-address 192.168.64.1 ssn 131