Cisco Cisco Packet Data Gateway (PDG)
MME Service Configuration Mode Commands
peer-sgsn ▀
Command Line Interface Reference, StarOS Release 17 ▄
7271
peer-sgsn
Statically configures peer SGSN environments to facilitate MME-SGSN relocations over S3 or Gn/Gp interfaces.
Product
MME
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > MME Service
configure > context context_name > mme-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-mme-service)#
Syntax
peer-sgsn rai mcc mcc_value mnc mnc_value [ nri value ] rac value lac value address
ip_address capability [ gn ] [ gp ] [ s16 ] [ s3 ]
ip_address capability [ gn ] [ gp ] [ s16 ] [ s3 ]
no peer-sgsn rai mcc mcc_value mnc mnc_value [ nri value ] rac value lac value
peer-sgsn rnc-id mcc mcc_value mnc mnc_value rnc value address ip_address capability [ gn
] [ gp ] [ s16 ] [ s3 ]
] [ gp ] [ s16 ] [ s3 ]
no peer-sgsn rnc-id mcc mcc_value mnc mnc_value rnc value
rai
Configures Routing Area Identity (RAI) parameters used to facilitate a lookup for a specific peer SGSN.
rnc-id
Configures Radio Network Controller Identification (RNC-ID) parameters used to facilitate a lookup for a
specific peer SGSN.
specific peer SGSN.
mcc
mcc_value
Specifies the mobile country code (MCC) portion of the PLMN identifier as an integer from 100 through 999.
mnc
mnc_value
Specifies the mobile network code (MNC) portion of the PLMN identifier as a 2- or 3-digit integer from 00
through 999.
through 999.
nri value
Specifies the Network Resource Identifier (NRI) value used as an additional identity along with the RAC
within the RAI parameters as an integer from 0 through 65535.
within the RAI parameters as an integer from 0 through 65535.