Cisco Cisco Packet Data Gateway (PDG)
PDSN Service Configuration Mode Commands
▀ a11-signalling-packets
▄ Command Line Interface Reference, StarOS Release 17
7826
a11-signalling-packets
Applies DSCP marking for IP header carrying outgoing A11-signalling packets.
Product
PDSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > PDSN Service Configuration
configure > context context_name > pdsn-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-pdsn-service)#
Syntax
a11-signalling-packetsip-header-dscp hexa_number
[ no | default ] a11-signalling-packetsip-header-dscp
no
Disables the
a11-signalling-packets ip-header-dscp
option configuration.
default
Sets / Restores default value assigned for specified parameter
a11-signalling-packets ip-header-
dscp
.
hexa_number
a Hexa decimal number between 0x0 and 0x3F.
Usage
Use this command to configured value of DSCP to be set for all outgoing A11 signaling msg.
By default the CLI is disabled and DSCP is marked as 0 in ip-header.
By default the CLI is disabled and DSCP is marked as 0 in ip-header.
Example
The following command configures value of DSCP to be set for all outgoing to A11 signaling message
0x3F
:
a11-signalling-packets ip-header-dscp 0x3F