Cisco Cisco Packet Data Gateway (PDG)
Peer Profile Configuration Mode Commands
▀ gtpc
▄ Command Line Interface Reference, StarOS Release 17
7930
gtpc
Configure the GTP-C parameters for this peer profile.
Product
GGSN
P-GW
SAEGW
S-GW
Privilege
Administrator
Mode
Exec > Global Configuration > Peer Profile Configuration
configure > peer-profile service-type <service-type> {default | name peer_profile_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-peer-profile-ggsn/pgw/sgw-access/nw)#
Syntax
gtpc { echo { interval inter_dur | retransmission-timeout echo_retrans_dur } | max-
retransmission retrans_num | retransmission-timeout retrans_dur }
retransmission retrans_num | retransmission-timeout retrans_dur }
default gtpc { echo [ interval | retransmission-timeout ] | max-retransmissions |
retransmission-timeout }
retransmission-timeout }
no gtpc echo
default
Resets the specified parameter to its default value.
no
Disables or removes the configured GTP-C echo settings.
echo interval inter_dur
Default: 60
Configures the duration, in seconds, between the sending of echo request messages.
Configures the duration, in seconds, between the sending of echo request messages.
inter_dur
must be an integer from 60 through 3600.
echo retransmission-timeout echo_retrans_dur
Default: 3
Configures the echo retransmission timeout, in seconds, for the this peer profile.
Configures the echo retransmission timeout, in seconds, for the this peer profile.
echo_retrans_dur
must be an integer ranging from 1 to 20.