Cisco Cisco Packet Data Gateway (PDG)
SCCP Network Configuration Mode Commands
▀ self-point-code
▄ Command Line Interface Reference, StarOS Release 17
8320
self-point-code
This command specifies the SS7 point code for this SCCP service.
Product
SGSN
HNB-GW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > SCCP Network Configuration
configure > sccp-network id_number
Entering the above command sequence results in the following prompt:
[local]host_name(config-sccp-network-sccp_id)#
Syntax
self-point-code point_code
no self-point-code
no
Deletes the configured self point code.
point_code
Defines the point code to assign to this SCCP network service.
point_code:
value entered must adhere to the point code variant selected when the SCCP network instance
was defined:
ITU Range 0.0.1 to 7.255.7
ANSI Range 0.0.1 to 255.255.255
TTC Range 0.0.1 to 15.31.255
a string of 1 to 11 combined digits ad period.
Usage
Use this command to assign the self point code to use for this SCCP service.
Example
The following command sets an ITU-based point code for this SCCP service:
self-pointcode 4.121.5
The following command removes the configured self-point code:
no self-pointcode