Cisco Cisco Packet Data Gateway (PDG)
Service Redundancy Protocol Configuration Mode Commands
▀ advertise-routes-in-standby-state
▄ Command Line Interface Reference, StarOS Release 17
8348
advertise-routes-in-standby-state
Enables advertising BGP routes from an ICSR chassis in standby state.
Product
All products that support ICSR
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > Service Redundancy Protocol Configuration
configure > context context_name > service-redundancy-protocol
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-srp)#
Syntax
advertise-routes-in-standby-state [ hold-off-time hold-off-time ] [ reset-bfd-nbrs bfd-
down-time ]
down-time ]
default advertise-routes-in-standby-state [ hold-off-time] [reset-bfd-nbrs]
no advertise-routes-in-standby-state [ hold-off-time] [reset-bfd-nbrs]
default
Sets the specified route advertisement option to its default value–:
hold-off-time – 30 seconds
reset-bfd-nbrs – ??? milliseconds
no
Disables the specified type of route advertisement.
[ hold-off-time
hold-off-time
]
This option delays advertising the BGP routes until the timer expires. Specify hold-off-time in seconds as an
integer from 1 to 300.
integer from 1 to 300.
[ reset-bfd-nbrs
bfd-down-time
]
After resetting BFD, this option keeps the BFD sessions down for the configured number of milliseconds to
improve network convergence. Specify bfd-down-time as an integer from 50 to 120000.
improve network convergence. Specify bfd-down-time as an integer from 50 to 120000.
Usage
Use this command and its keywords to take advantage of faster network convergence accrued from deploying
BGP Prefix Independent Convergence (PIC) in the Optical Transport Network Generation Next (OTNGN).
BGP PIC is intended to improve network convergence which will safely allow for setting aggressive ICSR
failure detection timers.
BGP Prefix Independent Convergence (PIC) in the Optical Transport Network Generation Next (OTNGN).
BGP PIC is intended to improve network convergence which will safely allow for setting aggressive ICSR
failure detection timers.
Example