Cisco Cisco Packet Data Gateway (PDG)
Service Redundancy Protocol Configuration Mode Commands
▀ chassis-mode
▄ Command Line Interface Reference, StarOS Release 17
8354
chassis-mode
Defines the chassis’s operational mode - primary or backup - for ICSR.
Product
All products supporting ICSR
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > Service Redundancy Protocol Configuration
configure > context context_name > service-redundancy-protocol
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-srp)#
Syntax
chassis-mode { backup | primary }
default chassis-mode
default
Resets the chassis mode to the default setting of backup.
backup
(Default) Configures the system as the backup chassis operating in standby state.
primary
Configures the system as the primary chassis operating in active state.
Usage
Sets the chassis mode (primary or backup) for the system within the framework of ICSR.
Example
The following example configures the system as the primary chassis operating in active state
chassis-mode primary