Cisco Cisco Packet Data Gateway (PDG)
Subscriber Configuration Mode Commands
▀ mobile-ip ha
▄ Command Line Interface Reference, StarOS Release 17
8784
mobile-ip ha
Accommodates two Mobile IP (MIP) Home Agent (HA) options in subscriber mode.
Product
PDSN
HA
ASN-GW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > Subscriber Configuration
configure > context context_name > subscriber { default | name subscriber_name }
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-subscriber)#
Syntax
[ no ] mobile-ip ha { assignment-table name | ignore-unknown-ha-addr-error }
no
Disables the mobile IP HA option specified.
assignment-table name
Specifies the name of an existing MIP HA Assignment table.
name
must be an alphanumeric string of 1
through 63 characters.
ignore-unknown-ha-addr-error
Default is disabled.
Enables or disables the HA to accept or reject the RRQ from a particular subscriber.
Enables or disables the HA to accept or reject the RRQ from a particular subscriber.
Usage
Use this command to assign a MIP HA Assignment table to the current subscriber.
Use this command to disable or enable the HA to accept or reject the RRQ from a particular subscriber when
the HA address in the incoming MIP RRQ is not the same as the HA service address. The feature is off by
default which causes the RRQ to be rejected with the error code UNKNOWN_HOME_AGENT.
Use this command to disable or enable the HA to accept or reject the RRQ from a particular subscriber when
the HA address in the incoming MIP RRQ is not the same as the HA service address. The feature is off by
default which causes the RRQ to be rejected with the error code UNKNOWN_HOME_AGENT.
Example
The following command assigns the MIP HA Assignment table named
Atable1
to the current subscriber:
mobile-ip ha assignment-table Atable1
The following command sets
ignore-unknown-ha-addr-error
to its default disabled state:
no mobile-ip ha ignore-unknown-ha-addr-error