Cisco Cisco Packet Data Interworking Function (PDIF)
APN Configuration Mode Commands
▀ associate qci-qos-mapping
▄ Command Line Interface Reference, StarOS Release 17
1292
associate qci-qos-mapping
Associates a pre-configured QCI-QoS-Mapping table with this APN to support per APN DSCP marking.
Product
P-GW
SAEGW
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > APN Configuration
configure > context context_name > apn apn_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-apn)#
Syntax
[ no ] associate qci-qos-mapping qci_qos_map_table_name
no
Removes the selected association of QCI-QoS-Mapping table from this APN.
qci_qos_map_table_name
Specifies a preconfigured QCI-QoS-Mapping table from global configuration mode to this APN.
qci_qos_map_table_name
must be an existing QCI-QoS-mapping table expressed as a string of 1 through
63 characters.
QCI-QoS-Mapping tables are configured in QCI-QoS_Mapping Configuration mode.
QCI-QoS-Mapping tables are configured in QCI-QoS_Mapping Configuration mode.
Usage
Use this command to associate a preconfigured QCI-QoS-Mapping table with an APN to provide per APN
basis DSCP marking.
The GGSN/PGW supports configurable DSCP marking of the outer header of a GTP-U tunnel packet based
on a QCI/THP table for the Gn/Gp and S5/S8 interfaces. This feature allows configuring DSCP marking table
on a per APN basis.
basis DSCP marking.
The GGSN/PGW supports configurable DSCP marking of the outer header of a GTP-U tunnel packet based
on a QCI/THP table for the Gn/Gp and S5/S8 interfaces. This feature allows configuring DSCP marking table
on a per APN basis.
Important:
In order to be backward compatible with old configuration, if a DSCP marking table is associated
with GGSN service and not with the APN, then the one in GGSN service will be used. If table is associated in both
GGSN service and APN, then the one on APN will take precedence.
GGSN service and APN, then the one on APN will take precedence.
Example
The following command associates a preconfigured QCI-QoS-Mapping table
dscp_mark_table1
with this
APN.
associate qci-qos-mapping dscp_mark_table1