Cisco Cisco Packet Data Interworking Function (PDIF)
APN Profile Configuration Mode
dedicated-bearers ▀
Command Line Interface Reference, StarOS Release 17 ▄
1491
dedicated-bearers
Configures the MME to either accept or reject dedicated GBR and Non-GBR bearers.
Product
MME
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > APN Profile Configuration
configure > apn-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(apn-profile-profile_name)#
Syntax
dedicated-bearers { gbr { accept | reject } | non-gbr { accept | reject } }
[ remove ] dedicated-bearers { gbr | non-gbr }
remove
Removes the configuration, returning the system to the default setting where the MME accepts GBR or Non-
GBR dedicated bearers.
GBR dedicated bearers.
gbr { accept | reject }
Configures the MME to
accept
or
reject
dedicated GBR bearers.
non-gbr { accept | reject }
Configures the MME to
accept
or
reject
dedicated Non-GBR bearers.
Usage
The MME differentiates GBR and Non-GBR dedicated bearers as follows: GBR Bearers - QCI value ranges
from 1 to 4; Non-GBR bearers - QCI value ranges from 5-9.
In the case of a UE-initiated Bearer Resource Allocation Reject, the ESM cause “EPS QOS not accepted” is
used and the corresponding bearer allocation reject MME statistic is incremented.
In the case of a Create Bearer Request Reject, the EGTP cause “Service denied” is used and the
corresponding EGTP statistic is incremented.
Note: Handling of multiple bearers in a Create Bearer request from S-GW for Partial accept/reject of
GBR/Non-GBR dedicated bearers is a current limitation.
from 1 to 4; Non-GBR bearers - QCI value ranges from 5-9.
In the case of a UE-initiated Bearer Resource Allocation Reject, the ESM cause “EPS QOS not accepted” is
used and the corresponding bearer allocation reject MME statistic is incremented.
In the case of a Create Bearer Request Reject, the EGTP cause “Service denied” is used and the
corresponding EGTP statistic is incremented.
Note: Handling of multiple bearers in a Create Bearer request from S-GW for Partial accept/reject of
GBR/Non-GBR dedicated bearers is a current limitation.
Example
The following commands configure the MME to reject both GBR and Non-GBR dedicated bearers:
dedicated-bearers gbr reject
dedicated-bearers non-gbr reject