Cisco Cisco Packet Data Interworking Function (PDIF)
BITS Port Configuration Mode Commands
▀ mode
▄ Command Line Interface Reference, StarOS Release 17
1676
mode
Configures the framing mode for the port.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > BITS Port Configuration
configure > port bits slot_number/port_number
Entering the above command sequence results in the following prompt:
[local]host_name(config-port-slot_number/port_number)#
Syntax
mode { e1 | t1 } framing type
e1 | t1
e1
selects the SDH E1 framing mode.
t1
selects the SONET T1 framing mode.
framing
type
Specifies the type of framing used by E1 or T1 modes form which to derive timing:
basic
: Selects the Frame Alignment Signal (FAS) used with E1.
crcmf
: Selects the Multiframe with CRC (FAS+CRC) used with E1.
esf
: Selects the extended superframe format used with T1.
sf
: Selects the superframe format (D4) used with T1.
Usage
Set the ports framing mode parameters.
Example
Configure the port to support E1 with crcmf framing.
mode e1 framing crcmf