Cisco Cisco Packet Data Interworking Function (PDIF)
Call Control Profile Configuration Mode
▀ authenticate context
▄ Command Line Interface Reference, StarOS Release 17
1916
authenticate context
This command allows you to specify the authentication group, authentication method, context, and type of
authentication for the AAA server.
authentication for the AAA server.
Product
SaMOG
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Call Control Profile Configuration
configure > call-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-call-control-profile-profile_name)#
Syntax
authenticate context context_name [ aaa-group aaa_group_name ] [ auth-type { diameter |
radius } ] [ auth-method { [ eap ] [non-eap] } ]
radius } ] [ auth-method { [ eap ] [non-eap] } ]
remove authenticate context [ aaa-group ]
remove
Sets the authentication type to its default value:
Default (SaMOG 3G license): radius
Default (SaMOG Mixed Mode license): diameter
Default (SaMOG 3G license): radius
Default (SaMOG Mixed Mode license): diameter
context_name
Specified the name of the context for authentication.
context_name
must be an alphanumeric string of 1 through 79 characters.
aaa-group aaa_group_name
Optionally, specifies the AAA group for MRME.
aaa_group_name
must be an alphanumeric string of 1
through 63 characters.
auth-method { [ eap ] [non-eap] }
Optionally, specifies the authentication method for the call control profile.
If this configuration is not used, the default value is EAP based authentication method.
If this configuration is not used, the default value is EAP based authentication method.
Important:
The SaMOG Web Authorization feature is license dependent. Contact your Cisco account
representative for more information on license requirements.