Cisco Cisco Packet Data Interworking Function (PDIF)
Call Control Profile Configuration Mode
▀ eir-profile
▄ Command Line Interface Reference, StarOS Release 17
1946
eir-profile
Identifies and associates an EIR profile to be used by the SGSN for EIR selection.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Call Control Profile Configuration
configure > call-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-call-control-profile-profile_name)#
Syntax
[ no ] eir-profile profile_name
no
Disassociates the EIR profile with the call control profile.
Usage
The equipment identify register (EIR) profile contains all the parameters needed to identify and work with an
EIR to perform check IMEI procedures and to address multiple EIR through a single EIR address. The
configuration in the EIR profile associated with the call control profile take precedence over the EIR
parameters configured in the MAP service.
EIR to perform check IMEI procedures and to address multiple EIR through a single EIR address. The
configuration in the EIR profile associated with the call control profile take precedence over the EIR
parameters configured in the MAP service.
Example
Associate the EIR profile called
LondonEIR1
:
eir-profile LondonEIR1