Cisco Cisco Packet Data Interworking Function (PDIF)
Call Control Profile Configuration Mode
▀ ignore-ul-data-status
▄ Command Line Interface Reference, StarOS Release 17
1970
ignore-ul-data-status
This command is used to enable or disable processing of Uplink Data Status IE in Service Request.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Call Control Profile Configuration
configure > call-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-call-control-profile-profile_name)#
Syntax
[remove] ignore-ul-data-status
remove
Use this keyword to enable processing of Uplink Data Status IE in Service Request.
Usage
This feature is enabled by default, to disable the feature use the command
ignore-ul-data-status
. To
enable this feature use the command
remove ignore-ul-data-status
. When this feature is enabled,
RAB is established for NSAPIs present in the Uplink data status IE. RABs are not established if the NSAPI
PDPs are not present in the SGSN. If the Uplink data Status IE contains NSAPI not known to the SGSN, the
SGSN establishes all the RAB's. RAB's are not established if corresponding NSAPI is absent in the PDP-
Context Status IE. When this feature is disabled, if Uplink data status IE is received in service request the
SGSN ignores it and establishes RAB’s for all the PDP’s.
PDPs are not present in the SGSN. If the Uplink data Status IE contains NSAPI not known to the SGSN, the
SGSN establishes all the RAB's. RAB's are not established if corresponding NSAPI is absent in the PDP-
Context Status IE. When this feature is disabled, if Uplink data status IE is received in service request the
SGSN ignores it and establishes RAB’s for all the PDP’s.
Example
Use the following command to disable processing of Uplink Data Status IE in Service Request:
ignore-ul-data-status