Cisco Cisco Packet Data Interworking Function (PDIF)
Call Control Profile Configuration Mode
location-reporting ▀
Command Line Interface Reference, StarOS Release 17 ▄
2011
location-reporting
Enable 3G/2G Location Change Reporting feature on the SGSN.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Call Control Profile Configuration
configure > call-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-call-control-profile-profile_name)#
Syntax
[ remove ] location-reporting access-type { gprs | umts }
remove
If the
remove
keyword is included in the command, then the location change reporting feature is disabled.
access-type type
Defines the type of subscriber access which is to reported for location changes.
gprs
- 2G
umts
- 3G
Usage
Use the command multiple times to configure both types of access types.
This command enables the 3G/2G Location Change Reporting feature which notifies the GGSN whenever
one of the following changes for a UE:
This command enables the 3G/2G Location Change Reporting feature which notifies the GGSN whenever
one of the following changes for a UE:
the serving cell global identity (CGI), or
the service area identity (SAI), or
the routing area identity (RAI).
Example
The following command enables location change reporting to a GGSN for 3G subscribers:
location-reporting access-type umts
This command disables location change reporting that has been enabled for 2G subscribers:
remove location-reporting access-type gprs