Cisco Cisco Packet Data Interworking Function (PDIF)
Call Control Profile Configuration Mode
zone-code ▀
Command Line Interface Reference, StarOS Release 17 ▄
2101
zone-code
Configures a zone code listing of one or more location area code (LACs) included in the zone.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Call Control Profile Configuration
configure > call-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-call-control-profile-profile_name)#
Syntax
zone-code zc_id location-area-code lac
no zone-code zc_id [ location-area-code lac ]
no
Removes either a specific LAC from the zone code list. If the
location-area-code
parameter is not
included in the command, then the entire zone code list definition is removed from configuration.
zc_id
Identifies an instance of a zone code list as an integer from 1 to 65535.
An unlimited number of zone code lists can be configured per call control profile as the zone code lists are
allocated dynamically. A maximum of 10 zone code lists can be configured per Call Control Profile.
An unlimited number of zone code lists can be configured per call control profile as the zone code lists are
allocated dynamically. A maximum of 10 zone code lists can be configured per Call Control Profile.
location-area-code lac
Prompts for the location area-code(s), where the subscribers can roam, that are part of the zone.
lac
is an
integer from 1 to 65535.
Repeat the command with this parameter to include up to 100 LACs in the zone code list.
Repeat the command with this parameter to include up to 100 LACs in the zone code list.
Usage
Important:
While there is no limit to the number of zone codes that can be created, only 10 LACs per zone code
can be defined.
Use this command to define zone code restrictions. Regional subscription data at the home location register
(HLR) is used to determine the regional subscription area in which the subscriber is allowed to roam. The
regional subscription data consists of a list of zone codes. A zone code is comprised of one or more location
areas (identified by a LAC) into which the subscriber is allowed to roam. Regional subscription data, if
present in the insert subscriber data (ISD) request from the HLR, defines the subscriber's subscription area for
(HLR) is used to determine the regional subscription area in which the subscriber is allowed to roam. The
regional subscription data consists of a list of zone codes. A zone code is comprised of one or more location
areas (identified by a LAC) into which the subscriber is allowed to roam. Regional subscription data, if
present in the insert subscriber data (ISD) request from the HLR, defines the subscriber's subscription area for