Cisco Cisco Packet Data Interworking Function (PDIF)
CBS Service Configuration Mode Commands
▀ bind
▄ Command Line Interface Reference, StarOS Release 17
2158
bind
This command binds the CBS service to the IP address of a logical interface.
Product
HNB-GW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > Cell Broadcasting Service Configuration
configure > context context_name cbs-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-cbs-service)#
Syntax
bind address ip_address port port_number
no bind address
no
Removes a previously configured binding.
ip_address
Specifies the IPv4 type IP address of CBS service.
ip_address
must be expressed in IPv4 dotted-decimal
notation.
port
Specifies the TCP port of the CBS service.
port_number
is an integer between 1 and 65535. Standard port
used for service area broadcast ptotocol (SABP) is 3452 in case no other port is configured. It is an optional
parameter.
parameter.
Usage
Use this command to associate or tie a CBS service to a specific logical IP address previously configured in
the current context and bound to a port.
the current context and bound to a port.
Example
The following command binds the CBS service to the interface with an IP address of
92.168.1.111
having
port number 8888:
bind address 192.168.1.111 port 8888