Cisco Cisco Packet Data Interworking Function (PDIF)
Context Configuration Mode Commands E-H
▀ gtpp storage-server mode
▄ Command Line Interface Reference, StarOS Release 17
2478
gtpp storage-server mode
Configures storage mode, local or remote, for CDRs. Local storage mode is available with ASR 5000 platforms only.
Product
GGSN
P-GW
SAEGW
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration
configure > context context_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ctx)#
Syntax
gtpp storage-server mode { local | remote | streaming }
default gtpp storage-server mode
default
Configures this command with the default setting.
Default:
Default:
remote
local
Default: Disabled
Specifies the use of the hard disk on the SMC for storing CDRs
Specifies the use of the hard disk on the SMC for storing CDRs
remote
Specifies the use of an external server for storing CDRs. This is the default value.
streaming
Default: Disabled
Allows the operator to configure “streaming” mode of operation for GTPP group. When this keyword is
supplied the CDRs will be stored in following fashion:
Allows the operator to configure “streaming” mode of operation for GTPP group. When this keyword is
supplied the CDRs will be stored in following fashion:
When GTPP link is active with CGF, CDRs are sent to a CGF via GTPP and local hard disk is NOT
used as long as every record is acknowledged in time.
If the GTPP connection is considered to be down, all streaming CDRs will be saved temporarily on the
local hard disk and once the connection is restored, unacknowledged records will be retrieved from
the hard disk and sent to the CGF.
the hard disk and sent to the CGF.