Cisco Cisco Packet Data Interworking Function (PDIF)
Context Configuration Mode Commands I-M
ipv6 pool ▀
Command Line Interface Reference, StarOS Release 17 ▄
2571
ipv6 pool
Modifies the current context’s IP address pools by adding, updating or deleting a pool. This command also resizes an
existing IP pool.
existing IP pool.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration
configure > context context_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ctx)#
Syntax
ipv6 pool name { 6to4 local-endpoint ipv4_address [ default-relay-router router_address ]
| alert threshold | group-name name | policy { allow-static-allocation | dup-addr-
detection } | prefix ip_address/len [ 6to4-tunnel local-endpoint ip_address | default-
relay-router router_address ] | range start_addressend_address | suppress-switchover-arps
} [ prefix-length prfx_length ] [ private priority ] [ public priority ] [ shared
priority ] [ static priority ] [ group-name name ] [ vrf vrf-name ]
| alert threshold | group-name name | policy { allow-static-allocation | dup-addr-
detection } | prefix ip_address/len [ 6to4-tunnel local-endpoint ip_address | default-
relay-router router_address ] | range start_addressend_address | suppress-switchover-arps
} [ prefix-length prfx_length ] [ private priority ] [ public priority ] [ shared
priority ] [ static priority ] [ group-name name ] [ vrf vrf-name ]
no ipv6 pool name
no
Deletes the previously configured IPv6 pool.
name
Specifies the logical name of the IP address pool as an alphanumeric string of 1 through 31 characters.
6to4-tunnel local-endpoint ip_address
Specifies the IPv4 address of the local interface to be used for IPv6-to-IPv4 compatible pool address
construction.
construction.
alert threshold { 6to4 local-endpoint ipv4_address | alert threshold | group-
available | group-name name | policy { allow-static-allocation | dup-addr-
detection } | pool-free | pool-used | prefix | range start_address end_address }
available | group-name name | policy { allow-static-allocation | dup-addr-
detection } | pool-free | pool-used | prefix | range start_address end_address }
Default: All thresholds are disabled.
Configures IP address pool-level utilization thresholds. These thresholds take precedence over context-level
IPv6 pool thresholds.
Configures IP address pool-level utilization thresholds. These thresholds take precedence over context-level
IPv6 pool thresholds.
6to4
: Sets an alert based on the IPv6 Pool for an IPv6-to-IPv4 compatible address type.
alert-threshold
: Sets an alert based on the percentage free alert threshold for this group.
group-available
: Sets an alert based on the percentage free alert threshold for this group.
group-name
: Sets an alert based on the IPv6 Pool Group.