Cisco Cisco Packet Data Interworking Function (PDIF)
Context Configuration Mode Commands S-Z
sgtp-service ▀
Command Line Interface Reference, StarOS Release 17 ▄
2755
sgtp-service
Creates an SGTP service instance and enters the SGTP Service Configuration mode. This mode configures the GPRS
Tunneling Protocol (GTP) related settings required by the SGSN and eWAG to support GTP-C (control plane)
messaging and GTP-U (user data plane) messaging.
Tunneling Protocol (GTP) related settings required by the SGSN and eWAG to support GTP-C (control plane)
messaging and GTP-U (user data plane) messaging.
Product
eWAG
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration
configure > context context_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ctx)#
Syntax
[ no ] sgtp-service sgtp_service_name
no
If previously configured, removes the specified SGTP service configuration in the current context.
sgtp_service_name
Specifies name of the SGTP service.
sgtp_service_name
must be an alphanumeric string of 1 through 63 characters.
Important:
Service names must be unique across all contexts within a chassis.
Usage
Use this command to create, edit, or remove an SGTP service.
On entering this command, the CLI prompt changes to:
On entering this command, the CLI prompt changes to:
[context_name]hostname(config-sgtp-service)#
Example
The following command creates an SGTP service named
sgtp1
in the current context:
sgtp-service sgtp1
The following command removes, if previously configured, the SGTP service named
sgtp1
from the current
context:
no sgtp-service sgtp1