Cisco Cisco Packet Data Interworking Function (PDIF)
Context Configuration Mode Commands S-Z
▀ ssl
▄ Command Line Interface Reference, StarOS Release 17
2762
ssl
Creates a new Secure Sockets Layer (SSL) template or specifies an existing one and enters the SSL Template
Configuration Mode.
Configuration Mode.
Product
SCM
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration
configure > context context_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ctx)#
Syntax
[ no ] ssl template name { ssl-subscriber }
no
Removes the specified SSL template from the context.
template
name
Specifies the name of a new or existing SSL template as an alphanumeric string of 1 through 127
alphanumeric characters.
alphanumeric characters.
ssl-subscriber
Specifies that the SSL template is an SSL subscriber template.
Usage
Use this command to create a new SSL template or modify an existing one.
Entering this command results in the following prompt:
Entering this command results in the following prompt:
[context_name]hostname(cfg-ctx-ssl-subscriber-template)#
SSL Template Configuration Mode commands are defined in the SSL Template Configuration Mode
Commands chapter.
Commands chapter.
Example
The following command specifies the SSL template
ssl_template_1
and enters the SSL Template
Configuration Mode:
ssl template ssl_template_1 ssl-subscriber