Cisco Cisco Packet Data Interworking Function (PDIF)
Crypto Map IKEv2-IPv6 Configuration Mode Commands
▀ remote-secret-list
▄ Command Line Interface Reference, StarOS Release 17
2936
remote-secret-list
Enables the use of a Remote Secret List containing up to 1000 pre-shared keys.
Product
All Security Gateway products
Important:
This command appears in the CLI for this release. However, it has not been qualified for use with
any current Cisco StarOS gateway products.
Privilege
Security Administrator
Syntax
remote-secret-list list_name
no remote-secret-list
no
Disables use of a Remote Secret List.
list_name
Specifies the name of an existing Remote Secret List as an alphanumeric string of 1 through127 characters.
Usage
Enable the use of a Remote Secret List containing up to 1000 pre-shared keys.
Only one active remote-secret-list is supported per system.
For additional information, refer to the Remote Secret List Configuration Commands chapter of the Command
Line Interface Reference and the System Administration Guide.
Only one active remote-secret-list is supported per system.
For additional information, refer to the Remote Secret List Configuration Commands chapter of the Command
Line Interface Reference and the System Administration Guide.
Example
The following command enables a remote-secret-list named rs-list:
remote-secret-list rs-list